bearing manufacturer
 
Bearing Bearing Bearing Bearing Bearing Bearing Bearing Bearing Bearing Bearing Bearing
 
Product Search:
 
 
  • TRADING BEARING
  • Track Roller Bearing+
    Double-Row Deep Groove Ball Bearing+
    Double-Row Angular Contact Ball Bearing+
    Single Row Angular Contact Ball Bearings+
    NA SERIES BIG SIZE NEEDLE ROLLER BEARING+
    Common Spindle bearing+
    High-Speed Spindle bearing+
    Ultra-High Speed Spindle bearing+
    Ball Screw Support Bearings(BS SERIES)+
    Ball Screw Support Bearings(ZARN SERIES)+
    Ball Screw Support Bearings(ZARF SERIES)+
    Ball Screw Support Bearings(ZKLN SERIES)+
    Ball Screw Support Bearings(ZKLN..PE SERIES)+
    Ball Screw Support Bearings(ZKLF SERIES)+
    Ball Screw Support Bearings(ZKLFA SERIES)+
    Thin-Section Four-point contact bearing+
    Cross Roller bearing for Robot machinery+
    Dental bearing+
    Thrust Ball bearing(D series)+
    Thrust Ball bearing(GT series)+
    Thrust Roller Bearing(T series)+
    Thrust Roller Bearing(RT00 Series)+
    Thrust Roller Bearing(RT600 series)+
    Thrust Roller Bearing(RT700 Series)+
    X-RAY Tube Precision Bearing+
    Metric Tapered Roller Bearing+
    Inch Tapered Roller Bearing+
    Wheel Bearing+
    Wheel Hub Bearing+
  • OWN PRODUCTION BEARING
  • XIAMEN SMARK BEARING CO., LTD.,
    Add: NO.52 TO 58, FANGHU WEST ROAD, HULI DISTRICT,XIAMEN CITY, CHINA
    P.C.: 361004
    Tel: 0086-592-6780643
    Fax: 0086-592-6106330
    E-mail: sales@gjpbearing.com
    URL: Http://www.gjpbearing.com
    dental bearing PRECISION BEARING

    Click View Big PIC
    The high-speed dental drill ball bearings which are for the high-speed dental hand piece,can rotate at the speed of 
    400,000 rpm, replaceable with the dental hand pieces produced in Japan, Germany and UK etc. At the 
    normal working condition, the clinical service life is no less than six months.The high-speed dental drill
     ball bearing is a kind of precision micro bearing, thus the careful installation and use, meticulous operation
     and elaborate maintenance are needed, otherwise its performance and working life will be affected directly.
     For instance, the damage of ball and groove by the impulsive load during the assembly, bearing 
    contamination and improper lubrication etc., all these will lead to the lower speed, higher vibration and noise, fracture 
    of cage and shorter service life of the bearing.With regard to the bearing installation, the interference fit of the shaft 
    and bearing bore is preferred to be within 0-2um. The roundness deviation of the shaft shall be less than 2um. When 
    the shaft is pressed into the bearing bore, the acting force shall be directly on the end face of inner ring. The force
     shall not pass through the ring raceway groove or the steel ball, otherwise the bearing precision will be damaged.
     After a pair of bearings are installed on the turbine, the bearing and the turbine shall be cleaned, then drop the lubricating oil.
     At the moment, they can be mounted in the head (Never use the alcohol or acetone as the cleaning liquid). In order to 
    ensure the high speed, after mounting in the head, apply some axial preload on the pair of bearings. The load is 1-2N.
     After the finish of installation, the shaft shall not have the axial moving. The rotation of the bearing shall be flexible.
     If the axial preload is too tight or loose, replace the washer or add or remove the gasket, so as to ensure the correct preload,
     in case of the revolution skidding or top-like rotation of steel ball at the high speed.The maintenance of turbine head is very 
    important for the normal working and long service life of the bearing. In the clinical use in the hospital, besides the daily disinfection,
     the daily cleaning and maintenance shall be done to the turbine head. Before the use, demount it and apply the cleaning liquid. 
    Then mount it, and fix the drill bit by hand instead of rotating. Ventilate the compressed air for some seconds. Use it after the 
    bearing is cleaned and lubricated by the compressed air.
    GJP Code Dimensions Speed Limited Air pressure Noise
    d D B rpm MPa dB
    S418FMCKHH 3.175 6.35/7.5 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418FMCKH 3.175 6.35/7.5 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418FMCKW 3.175 6.35/7.5 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418MCKHH 3.175 6.35 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418MCKH 3.175 6.35 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418MCKK 3.175 6.35 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
    S418MCK 3.175 6.35 2.38 350000 to 400000 0.2 to 0.25 not more than 70dB
    C93KXA6 3.175 6.35/5.97 2.38 350000 to 400000 0.2 to 0.25 not more than 70dB
    PA-S03(SET) 3.175 6.35/5.97 2.78 350000 to 400000 0.2 to 0.25 not more than 70dB
       
         Home | About Us | News | Equipment | Sales Center | Service | Recruit | Contact Us
    WE SPECIALIZE IN PRODUCING ALL TYPE OF MOUNTED UNIT BEARINGS..
        COPYRIGHT 2007 XIAMEN SMARK BEARING CO.,LTD. TEL: 0086-592-6780643/FAX:0086-592-6106330 Linkwell